Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.
For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However, if you have double pane windows that are anchored by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.
Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.
It's a good idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your home until a professional is able to fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is substantial, you may want to use an alarm system that includes a window. This will provide the best of both.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.
Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows so you can reach the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're satisfied with the fit, you can tighten the screws until they remain in position.
If you are unable to move the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.
uPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need close your window and do a test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the check here handle. Then turn the mechanism to position.
3. Water Leaks
It is essential to take action if you get up each morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.
It is important to check that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme situations, you read more may have to replace the window.
Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and is able to quickly spread throughout the here home.
It is also important to note that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges may be to blame read more when your uPVC window is difficult to open, or if it opens in an ease. These are easily replaced by any competent DIYer and can be completed in just a few minutes.
Like any mechanical part hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do if you have someone to assist in holding the frame in place.
It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge. This shows which way the window should open.
The issue can be caused due to opening the window in the wrong way or by a poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you advice.
Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This should be done at least every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.
5. Draughts
Draughts can be caused by several different things. Firstly the hinges, again due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it could be necessary to have them re-aligned or replaced. The interlock, which is located get more info on the hinge side of the window, can also become misaligned, again it may be possible to give them a clean but in some cases it might be necessary to have these replaced.
These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen the possibility of draughts.
The last way to reduce the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can help block out cold air and keep your home warm and cozy!
With a little maintenance and repair windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it is cheaper to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.